====== RF and IF Configuration ======

Check the Status Monitor to see if the Cross-over switches and RCP IF Attenuators are at the default levels:
  * At all sites, cross-over switches should be **Direct**
  * IF Attenuator settings should be as follows
    * At Hobart: 
      * S RCP : 0.0 dB
      * X RCP : 12.0 dB
    * At Katherine
      * S RCP : 15.5 dB
      * X RCP : 8.5 dB
    * At Yarragadee
      * S RCP : 3.0 dB
      * X RCP : 0.0 dB

If these values are not correct, they will need adjusting. See: [[operations:currentissues|Current Issues]] - Crossover Switches at Katherine