====== Monitoring at AuScope sites ======

Raspberry Pi PCs are being installed at the sites for monitoring temperature and humidity in the antenna and (in Katherine) any vibrations on the maser.

First system is in at Katherine which has two raspberry pi PCs, one for the antenna and one for the maser room. The other sites will have PCs in the antenna.

===== Hardware and Software setup =====

  * [[operations:temphumidmonitor_hardware|Hardware setup and configuration]]
  * [[operations:temphumidmonitor_software|Software setup and configuration]]
  * [[operations:temphumidmonitor_rpisetup|Raspberry Pi access, setup and configuration]]