====== Raspberry Pi access and configuration ======

===== Access: =====

Access via VNC or SSH:

username is ''pi'', password is as usual


====== Network config =====
This should be done already, but just in case...

  * For masertempke the IP address should be 131.217.61.28.
  * For antennatempke the IP address should be 131.217.61.29.
  * For antennatempyg the IP address should be 131.217.61.80.
  * For antennatemphb the IP address should be 131.217.63.4.

Edit ''/etc/dhcpcd.conf'':

For Katherine or Yarragadee:

<code>
interface eth0
static ip_address=131.217.61.28/26
# /26 = netmask of 255.255.255.192
static routers=131.217.61.1
static domain_name_servers=131.217.0.19
</code>

For Hobart:
<code>
interface eth0
static ip_address=131.217.63.4/24
static routers=131.217.63.1
static domain_name_servers=131.217.0.19
</code>

The hostname should be correct but can be set via the Preferences/Raspberry Pi configuration GUI on the desktop.

Reboot.
==== Packages installed ====

[[operations:temphumidmonitorrpi|Configuring Raspberry Pis for Temperature and Humidity monitoring]]