DBBC v104 testing at Yg

Edited /usr2/control/equip.ctl and changed version to v104
on DBBC, started DBBC2 Control DDC v104_2.exe
created dbbc_config_file_104_calibration.txt
in pcfs:
- dbbc=load=dbbc_config_file_104_calibration.txt
- dbbc=reconf
- dbbc=pps_sync
- smlstat
- smlrf=on (freq is 764 MHz, level = -25)
- dbbc=calibration
- wrote 2013-274T044906-calib.txt
  - First nulls at 80, 66, 76, 79
- Oops, forgot about AGC loop (not sure how critical)
- dbbc=dbbcgain=all,man
- dbbc=calibration
- wrote 2013-274T045548-calib.txt
  - First nulls at 82, 71, 86, 84
- dbbc=dbbcgain=all,man
on DBBC, created these files in C:\DBBC_CONF with default phase settings as shown above
- dbbc_config_file_104_point.txt
- dbbc_config_file_104_rapid.txt
on PCFS in /usr2/proc, edit point.prc and station.prc to point to these new config files
smlrf=off
Tried :
- proc=r4606yg
- setupsx
- caltsys : values looked plausible
- proc=point
- initp
- virgoa
- fivept
- Offsets look good
- onoff x 4. Some variation. RFI?
- then a bunch of Tsys measurements at zenith. Numbers looks consistent?