Hobart 26m
Disk VSN: HOB+0122 | Data volume at beginning: 5860.465 GB
1800UT Experiment started OK (Ross)
1430UT - During checklist have noticed alarms are muted and Ho26m alarm has been going off since 0926UT. Drives appear to be stuck. Attempting remote fix now. (Tiege)
1500UT - Getting error 'Direct antenna communication unavailable“ when trying to work with fs. Persisting after restart. May need to try vdesk drive reboot. (Tiege)
1530UT - vdesk seems to keep crashing when attempting to switch drives on after an abort. (Tiege)
1540UT - Looks like the drives need a manual restart. The 26m is not following on for the next experiment. So I am not going to drive down and perform the manual reset as at best it would result in 1-1.5 hours of extra data and I do not currently feel safe driving down at ~3am half-asleep. (Tiege)
1545UT - Bugger it, I will head down. So at least the telescope can be stowed properly in case wind picks up etc. (Tiege)
1615UT - Unfortunately it looks like the manual drive reset is not working also. I am unable to switch the power on to the drives. Have spoken to Jamie and we are going to just leave it until Brett can take a look in the morning. (Tiege)
Katherine 12m
Disk VSN: HART-032 | Data volume at beginning: 970.542 GB
Disk VSN: HOB+0121 | Data volume at beginning: 0.000 GB
1838UT Key turned on module in bank B, started recording to HOB+0121 commencing scan No00009 (Ross)
23:56 UT waiting at limit scan No00062 (Warren)
2:50 UT No00092-93 waiting at limit (W)
5:55 UT No00123 waiting at limit
1400UT - Consistent waiting at limit and tracking errors too large warnings (Tiege)
Yarragadee 12m
Disk VSN: SHAO-017/2000 | Data volume at beginning: 0.00 GB recorded 1950 GB
Disk VSN: HOB+0069/8000 | Data volume at 22:42: 0 GB
1800UT Experiment started OK (Ross)
22:45 UT Changed disks to HOB+0069 (Warren)
23:56 UT problem with schedule? waiting at limit for this scan No00062, stop/restart schedule (W)
next good scan No00066 (W)
2:50 UT scan No00092-93 waiting at limit (W)
5:55 UT No00123 waiting at limit
1400UT - Consistent waiting at limit and tracking errors too large warnings (Tiege)
1713UT - Looks like Yg is not going to have quite enough space on the disk for the experiment. Will miss the last scan (maybe 2) (Tiege)
1743UT - Module full. (Tiege)