1814 UT Experiment started - delays due to problems with Ke (Bryn)
07:02:38UT Antenna Stowed due to high winds (JR)
7:45:00UT Schedule halted due to constant wind stows. Av speed: 59.26km/h (JR)
10:42UT Schedule resumed (JR). Scans effected: 056-0702 to 056-1050. (JR)
12:30 UT Antenna Stowed due to high winds, (AK)
13:08 UT Wind was consistently bad (>40km/hr) halted the schedule. (AK)
13:18 UT Stopped recording. Realised I should have probably should have entered “disk_record =off” after it stowed the first time. Log monitor still says recording (bug?) though disk_pos has not changed. (AK)
14:21 UT restarted the schedule once the wind had died down and the live page said “wind_ok”. Scans affected 056-1231 through to 056-1415. (AK)
15:38 UT Antenna stowed due to high winds. (AK)
16:15 UT Schedule halted, winds were still >42 km/hr
17:58 UT Antenna remained stowed due to winds. The wind temporarily dipped below 30 km/hr tried running “schedule=crf93” but no luck. Missed all scans 056-1538 onwards. (AK)
1814 UT Experiment started - delays due to problems with Ke (Bryn)
07:30UT ALARM Automatic wind stow activated (JR)
07:35UT Auto-stow released. Scans effected: 056-0726 and 056-0733 (JR)
07:40UT ALARM Automatic wind stow activated (JR)
07:51UT Auto-stow released. scans effected: 056-0740 and 056-0748 (JR)
08:16UT ALARM Automatic wind stow activated (JR)
08:21UT Auto-stow released. Scans effected 056-0813 and 056-0822 (JR)
08:27UT ALARM Automatic wind stow activated (JR)
08:46UT Auto-stow released, activated again 2 minutes later. (JR)
08:56UT Auto-stow released. Scans effected: 056-0822, 056-0830, 056-0838, 056-0846, 056-0853. (JR)
09:43UT ALARM Automatic wind stow activated (JR)
09:48UT Auto-stow released. Scans effected: 056-0940 and 056-0947 (JR)
09:54UT ALARM Automatic wind stow activated (JR)
09:59UT Auto-stow released. Scan effected: 056-0955 (JR)
12:28UT Automatic wind stow activated. (AK)
12:34UT Auto-stow released. Scan affected 056-1224 and 056-1231. (AK)
12:37UT mk5=mode? returns 0x55555555 : 2 : 2 ; which is not consistent for a crf experiment. Did a search for previous outputs of mk5=mode? and they were all displaying 0x55555555 : 2 : 2. According to wiki crf experiments should be 0x55555555 : 4 : 2. Not sure if this is of concern? (AK)
13:25UT Automatic wind stow. (AK)
13:30UT Antenna failed to recover from stow, winds were still high. (AK)
13:57UT winds slowed, antenna manually recovered as per wiki's guidelines. Scans affected 056-1327 through to 056-1351 (AK)
15:37UT Auto wind stop activated(?) acc to e remote control but no warning in logmonitor
15:53UT Auto-stow released. Scans affected 056-1538 and 056-1546. (AK)
15:58UT ALARM Automatic wind stow activated (AK)
16:04UT Auto-stow released. Scans affected 056-1553 and 056-1600 (AK)
16:31UT ALARM Automatic wind stow activated (AK)
16:37UT Auto-stow released. Scans affected 056-1631 (AK)
16:58UT ALARM Automatic wind stow activated (AK)
17:05UT Auto-stow released