OHG118

Katherine 12m

Disk VSN: HOB+0022/6000/1024 | Data volume at beginning: 3471.081 GB

• 1730UT Experiment started OK (Prad).
• 01:15UT Module change.
  • Disk VSN: HOB+1010/16000/1024 | Data volume at beginning: 0 GB

Yarragadee 12m

Disk VSN: OSOD-031 | Data volume at beginning: 0.000 GB

• 1730UT Experiment started OK (Prad).
• 2209UT ERROR m5 -900 Can't XLRappend() recording; m5 -904 MARK5 return code 4: error encountered (during attempt to execute). Some module problems. There was no space. Have to change the module (Simin).
• 2230UT Module change. Disk VSN: USN+0220/8000/1024 | Data volume at beginning: 0.000 GB. Missed scans: 092-2209 to 092-2231 (Simin)

Hobart 26m

Disk VSN: HOB+1006/16000/1024 | Data volume at beginning: 11959.457 GB

• 1730UT Experiment started OK (Prad).
• 1740UT-1815UT connection to mk5 seemed to have been lost. Found that the Dimino wasn't running in mk5hb (surprising). Problem got solved once the DIMino was back up (Prad).
• 0101UT ERROR qo -301 WARNING: ONSOURCE status is SLEWING! Wind stow (Simin).
• 0117UT Back to the schedule. Missed scans: 093-0101a to 093-0117 (Simin).
• 0650UT Clkoff command gives different values that's way apart, when used in pcfcho and pcfshb. Jamie said that he'll look into it (Jay).
• 13:21UT - HOB+1006 is full, switched to HART+101 (Patrick)
• 14:02UT - HART+101 is full. On my way to Mt Pleasant to put a new module in. (Patrick)
• 15:05UT - Swapped out HART+101 for HOB+1007 (bank B). Schedule resumed. Missed scans 093-1403 through 093-1507 (Patrick)
  • Disk VSN: HOB+1007/16000/1024 | Data volume at beginning: 0 GB
• 15:10UT - SX receiver pressure + temperature started to rise, turned on pump for half an hour to lower these values. (Patrick)
• 16:40UT - ops8 system reboot took down mk5hb Dimino. Must have been running on ops8. Started Dimino through terminal on newsmerd vnc. (Patrick)