User Tools

Site Tools


blog:dbbc_v104_testing_at_hb

This wiki is not maintained! Do not use this when setting up AuScope experiments!

DBBC v104 testing at Hb

  • Edited /usr2/control/equip.ctl and changed version to v104
  • on DBBC, started DBBC2 Control DDC v104_2.exe
  • created dbbc_config_file_104_calibration.txt
  • in pcfs:
    • dbbc=load=dbbc_config_file_104_calibration.txt
    • dbbc=reconf
    • dbbc=pps_sync
    • smlstat
    • smlrf=on (freq is 764 MHz, level = -25)
    • dbbc=dbbcgain=all,man
    • dbbc=calibration
    • wrote 2013-275T000650-calib.txt
      • First nulls at 102, 83, 89, 88
    • dbbc=dbbcgain=all,agc
  • on DBBC, created these files in C:\DBBC_CONF with default phase settings as shown above
    • dbbc_config_file_104_point.txt
    • dbbc_config_file_104_rapid.txt
  • on PCFS in /usr2/proc, edit point.prc and station.prc to point to these new config files
  • smlrf=off
  • Tried :
    • proc=r4604hb
    • setupsx
    • caltsys : values looked plausible
    • proc=point
    • initp
    • virgoa
    • fivept
    • Offsets look good
    • onoff x 3. Some variation. S-band RFI obvious. Weather overcast - problem?
    • azeloff=0d,0d
    • then a bunch of Tsys measurements at zenith. Numbers looks consistent?
,
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/blog/dbbc_v104_testing_at_hb.txt · Last modified: 2013/10/03 00:35 by Jim Lovell