AuScope VLBI Operations Wiki

User Tools

Site Tools

You are here: start » blog » safety_relay_and_feed_re-seal
Trace: • safety_relay_and_feed_re-seal

Sidebar

blog:safety_relay_and_feed_re-seal

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Safety Relay and feed re-seal

I am taking the cherry picker to the antenna now, Fri 19th March 0245 UT. I shall be performing the Safety Relay - Manual to Automatic Restart - modification so that we do not need to go to the antenna to restart it after a power fault. I shall also use the cherry picker and go to the feed and replace the temporary duct tape preventing water ingress, pending the replacement feed coming. The antenna will be free for use after 4.00 pm, or call me if you need it earlier. Brett Reid 19/3 2.50pm

Discussion

Brett Reid, 2010/03/20 12:15

All done. Antenna is available as of Friday afternoon. Now need to re-label the safety relay to 9K1. BR.

You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/blog/safety_relay_and_feed_re-seal.txt · Last modified: 2011/10/26 06:37 (external edit)

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki