User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

Notes on Test Setup in AuScope Control Room

PC Software

Software installed on windows PC (ops1) in control room

  • From the Resource DVD:
    • PC200W
    • RTMC web server (started installing after PC200W automatically!)
    • SCWin (aka Short Cut)
    • Device Configuration Utility
    • SMS (Storage module software)
    • RTMC Pro 4.0 Trial
    • RTMC Web Server 3.2 Trial (not sure if this was already done or not)
    • RTDAQ 1.0 Trial (selected trial when asked for serial number)
    • PCTDR 2.07
  • From the LoggerNet CD
    • Installed the software (key printed on CD)
  • Ran LoggerNet and started through setup wizard
    • Selected CR1000, named it Array 1
    • Selected IP Port as Communication Setup
    • Now need to give it an IP address…
/home/www/auscope/opswiki/data/attic/deformation/testsetup1.1346212902.txt.gz · Last modified: 2012/08/29 04:01 by Jim Lovell