This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- development:dynamicobserving:schedproc [2016/04/04 04:19]
Jim Lovell created
+++ development:dynamicobserving:schedproc [2016/04/05 00:02]
Jim Lovell
@@ Line 1: / Line 1: @@
 ====== Schedule and Procedure files ======
+  * The DynamicSnap.sh script operates by drudging a short-duration skd files and appending the snap commands to the end of the currently active schedule. To work, the active schedule needs to be prepared to reload itself, starting at a line number which corresponds to the beginning of the new data. On starting the dysched.pl script, a default ds.snp file is copied across to /usr2/sched/$sched$station.snp to serve as the template. This script includes some basic commands to load the dynamic scheduling procedure library and configure the rack and recorder. The text is included below. //You need to prepare a default schedule called ''/usr2/sched/ds.snp'' similar to this one.//
+<code>
+ " dyn1      2016 HOBART12 H Hb
+" H HOBART12 AZEL  .0000 300.0    3   90.0  630.0  75.0    3    5.0   88.0 12.0 Hb Hb
+" Hb HOBART12 -3949990.58300  2522421.17400 -4311708.24200 73741201
+" Hb   HOBART12    0    10000
+" drudg version 2015Jan29 compiled under FS  9.11.07
+" Rack=DBBC      Recorder 1=Mark5B    Recorder 2=none
+proc=ds
+ready_disk
+vsn?
+disk_pos
+setupsx
+</code>
+  * The dynamic observing script uses a fixed configuration, defined by the ds.prc file. When the dysched.pl script is started, this file is copied to /usr2/proc/$sched$station.prc where $sched is the schedule name given to dysched.pl, and $station is the station name (as given to dysched.pl). For the AuScope stations, the chosen mode is the 1 Gbps mode that has been typically used for the AUSTRAL experiment series, and a copy is included below. //Prepare your own file ''/usr2/proc/ds.prc'' to match the configuration of the experiment//
+<code>
+define  proc_library  00000000000x
+" dynamic     HOBART12  Hb
+" drudg version 2014Jul23 compiled under FS  9.11.06
+"< DBBC     rack >< Mark5B   recorder 1>
+enddef
+define  exper_initi   00000000000x
+proc_library
+sched_initi
+mk5=DTS_id?
+mk5=OS_rev?
+mk5=SS_rev?
+mk5=status?
+enddef
+define  setupsx       16053011358x
+pcalon
+tpicd=stop
+mk5b_mode=ext,0xFFFFFFFF,1
+mk5b_mode
+form=geo
+form
+dbbcsxd
+ifdsx
+cont_cal=off
+bbc_gain=all,agc,16000
+tpicd=no,0
+bank_check
+tpicd
+enddef
+define  dbbcsxd       16053011358x
+bbc01=612.99,a,16.00
+bbc02=652.99,a,16.00
+bbc03=752.99,a,16.00
+bbc04=912.99,a,16.00
+bbc05=1132.99,b,16.00
+bbc06=1252.99,b,16.00
+bbc07=1312.99,b,16.00
+bbc08=1332.99,b,16.00
+bbc09=325.99,c,16.00
+bbc10=345.99,c,16.00
+bbc11=365.99,c,16.00
+bbc12=395.99,c,16.00
+bbc13=445.99,d,16.00
+bbc14=465.99,d,16.00
+enddef
+define  ifdsx         16053011358x
+ifa=1,agc,1,40000
+ifb=4,agc,4,48000
+ifc=2,agc,2,32500
+ifd=2,agc,2,35000
+lo=
+lo=loa,7600.00,usb,rcp,1
+lo=lob,7600.00,usb,rcp,1
+lo=loc,1900.00,usb,rcp,1
+lo=lod,1900.00,usb,rcp,1
+enddef
+define  checkmk5      00000000000x
+scan_check
+!+1s
+sy=/home/oper/bin/auto_cor_check_2bit.sh &
+mk5=get_stats?
+mk5=get_stats?
+mk5=get_stats?
+mk5=get_stats?
+mk5=get_stats?
+mk5=get_stats?
+mk5=get_stats?
+mk5=get_stats?
+mk5=status?
+enddef
+</code>

AuScope VLBI Operations Wiki

User Tools

Site Tools

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

Page Tools