This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:a1403 [2014/09/06 10:23]
Jesse Swan
+++ handover:a1403 [2014/09/07 04:29] (current)
Jesse Swan
@@ Line 3: / Line 3: @@
 Hb:
   * Recording continued on HOB+0128/32000 from 10917 GB
+  * System check OK. halt issued at 01:08:37 UT, shcedule resumed at 01:39:18 UT
+     * When looking for the timestamp of first halt command, typed halt into input rather than search at 01:40:54 UT, schedule quickly resumed at 01:41:21 UT
 Ke:
   * Recording continued on HOB+0123/32000 from 11780 GB
   * Internet connection and eRC failed right before the schedule changeover, but change apparently happened smoothly
-  * 09:36:46.08 FS time difference 0.5 seconds or greater, DBBC reset and recording started 10:18:17 (delay difference is -0.285 us)
+  * **249.09:36:46.08** Delay difference >0.5s. Reset DBBC and recording restarted at 10:18:17 (delay difference is -0.285 us)
+  * System check OK. Halt issued at 04:02:50 UT, schedule a1404 resumed at 04:23:13
 Yg:
   * Recording started on a new module HOB+1006/16000 from 0 GB
+  * Bank B Module swap to 32 TB at 03:12 UT - recording continued on current module HOB+1006/16000 from 10361.15 GB
+  * System ckeck OK. halt issued at 03:09:22 schedule resumed at 03:40:13
+     * Schedule resume produced error **ERROR bo -124 No (scan_name=...) observation starting at a future time found in schedule.** so I started a1404 manually @ 03:46 UT