User Tools

Site Tools


handover:a1530

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:a1530 [2015/06/27 13:32]
liza
handover:a1530 [2015/06/29 00:23] (current)
Ellen Manning
Line 1: Line 1:
 ====== a1530 ====== ====== a1530 ======
 +
 +Fringe check done with all 3 telescopes using source 0537-441. No fringes detected in any baselines and plots were just flat lines. Trying again with the same source and all the plots had data in them the second time. (Ellen)
 +
 +     * Baseline hb-ke: no fringes detected
 +     * Baseline hb-yg: fringes found in channels 01 and 07 
 +     * Baseline ke-yg: fringe found in channel 02
 +
 +
 ** Hobart 12m:** ** Hobart 12m:**
  
-Disk VSN:+Disk VSN:HOB+0121
  
-Data volume at beginning:+Data volume at beginning: ​27799 GB
  
-** +     00:00 UT - Experiment started ok. (Ellen) 
-Katherine 12m:**+     12:40 UT - Halted schedule for SpaceX. (Ellen) 
 +     * 12:53 UT - Schedule resumed. Missed scans 179-1241a to 179-125. Antenna was still slewing when recording started for scan 179-1253. (Ellen) 
 +     14:06 -- interrupted for satellite tracking test for a short moment. (Liza) 
 +     Channels having RFI signs in the autocorrelation spectra: S6; (Liza) 
 +     * Channels having high Tsys (110-173K) X2, X5, X7, X8U, X8L, S1-S4 
 +2015.179.21:​25:​33.67;"​ Signs of RFI: S5, S6, ; High Tsys (105-130K): X2, X5, X7, X8LS1-S4 (Liza)
  
-Disk VSN: 
  
-Data volume at beginning:+**Katherine 12m:**
  
-** +Disk VSN:HOB+0119
-Yarragadee 12m:**+
  
-Disk VSN:+Data volume at beginning8399 GB 
 +     * 00:00 UT - Experiment started ok. (Ellen) 
 +     * 08:40 UT - Massive clock jump, delay difference of -8999990.802 us. I checked again straight away and the next one was fine. (Ellen) 
 +     * Channels having RFI signatures in spectra: X6, X8U, S2, S6; (Liza) 
 +     * Channels having high Tsys (125-140K): S1, S2, S4  (Liza)
  
-Data volume at beginning: ​ 
  
 +
 +**Yarragadee 12m:**
 +
 +Disk HOB+0033
 +
 +Data volume at beginning: 0 GB
 +
 +     * Tried to start recording to module VSN:​HOB+0127 (as this was the one specified to use) but the mk5 would not select it. So recording to module HOB+0033 instead. (Ellen)
 +     * 00:00 UT - Experiment started ok. (Ellen)
 +     * Reconrd pointer was lagging behind 80GB in the end of experiment (Liza)
 +     * Signs of RFI: S6, ; High Tsys (140-220K) S1, S2, S4-S6 (Liza)
  
 {{tag>}} {{tag>}}
Line 25: Line 50:
  
 ~~DISCUSSION~~ ~~DISCUSSION~~
- 
/home/www/auscope/opswiki/data/attic/handover/a1530.1435411959.txt.gz · Last modified: 2015/06/27 13:32 by liza