User Tools

Site Tools


handover:aov004_and_rd1507

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:aov004_and_rd1507 [2015/08/27 02:09]
Imogen Jones
handover:aov004_and_rd1507 [2015/08/27 10:13] (current)
David Horsley
Line 17: Line 17:
  
   * 00:45 UT: alarm through DBBC has changed in last digit. Might cause one of these small cklock jumps. (Lucia)   * 00:45 UT: alarm through DBBC has changed in last digit. Might cause one of these small cklock jumps. (Lucia)
-  * 02:07 UT: dbbc kept drifting. Schedule halted, dbbc reset, fs restarted. First good scan 239-0210. (Lucia)+  * 02:07 UT: dbbc kept drifting. Schedule halted, dbbc reset, fs restarted. First good scan 239-0210. Missed 90 GB. (Lucia) 
 +  * 09:57 UT: ALARM: Delay through DBBC has changed. Monitor for stability and reset DBBC if it drifts. Delay is not stable, dbbc keeps drifting, schedule halted and dbbc reset. Missed scans 239-0957 and 239-1007 (Ross).
  
  
Line 27: Line 28:
 Data volume at beginning: 0 GB Data volume at beginning: 0 GB
  
-  * ntpq has highly unstable offset in fifth row ranging between -13 and -22 ms. First two are stable, and third and fourth are consistently less than 10 ms (Ross). +  * SETUP: ​ntpq has highly unstable offset in fifth row ranging between -13 and -22 ms. First two are stable, and third and fourth are consistently less than 10 ms (Ross). 
-  * Cannot record to HART+101 module in Bank A. Module HOB+0083 in bank B can successfully be recorded to (Ross).+  * SETUP: ​Cannot record to HART+101 module in Bank A. Module HOB+0083 in bank B can successfully be recorded to (Ross).
  
 {{tag>}} {{tag>}}
Line 34: Line 35:
  
 ~~DISCUSSION~~ ~~DISCUSSION~~
- 
/home/www/auscope/opswiki/data/attic/handover/aov004_and_rd1507.1440641354.txt.gz · Last modified: 2015/08/27 02:09 by Imogen Jones