User Tools
Sidebar
handover:aov004_and_rd1507
This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
RD1507
Hobart 26m:
Disk VSN: HOB+1004
Data volume at beginning: 1025 GB
AOV004
Katherine 12m:
Disk VSN: HOB+0110
Data volume at beginning:RD 0 GB
- 00:45 UT: alarm through DBBC has changed in last digit. Might cause one of these small cklock jumps. (Lucia)
- 02:07 UT: dbbc kept drifting. Schedule halted, dbbc reset, fs restarted. First good scan 239-0210. Missed 90 GB. (Lucia)
- 09:57 UT: ALARM: Delay through DBBC has changed. Monitor for stability and reset DBBC if it drifts. Delay is not stable, dbbc keeps drifting, schedule halted and dbbc reset (Ross).
Yarragadee 12m:
Disk VSN: HOB+0083
Data volume at beginning: 0 GB
- SETUP: ntpq has highly unstable offset in fifth row ranging between -13 and -22 ms. First two are stable, and third and fourth are consistently less than 10 ms (Ross).
- SETUP: Cannot record to HART+101 module in Bank A. Module HOB+0083 in bank B can successfully be recorded to (Ross).
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/aov004_and_rd1507.1440669602.txt.gz · Last modified: 2015/08/27 10:00 by David Horsley
