User Tools

Site Tools


handover:aov008

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


aov008

Hobart 12m:

Data volume at beginning:5177 Disk VSN: USN+0221

*18:31:00 Experiment started late. This was due to Katherine e-RemoteCtrl becoming unresponsive and refusing to connect despite multiple restarts. Eventually had to log into pcfs and “pkill” the process and restart e-RemoteCtrl, it repeated the cycle once again before reconnecting properly. (AK)

  1. First Scan for which data was recorded was 076-1839 at 18:39:03
  2. Missed scans 076-1800a through to 076-1833 (starting at 18:33). Missed about 10.7 Gb of data. Though the experiment started at 18:31:00 not sure if it did miss 076-1833?

*21:48 UT mk5=dot? time was close to 24 ms. (AK)

Katherine 12m:

Disk VSN:HART+106

Data volume at beginning:

*18:31:00 Experiment started late. This was due to Katherine e-RemoteCtrl becoming unresponsive and refusing to connect despite multiple restarts. Eventually had to log into pcfs and “pkill” the process and restart e-RemoteCtrl, it repeated the cycle once again before reconnecting properly. (AK)

  1. First Scan for which data was recorded was 076-1839 at 18:39:03
  2. Missed scans 076-1800a through to 076-1833 (starting at 18:33). Missed about 9.1 Gb of data. Though the experiment started at 18:31:00 not sure if it did miss 076-1833?

*21:12 UT Katherine had the following errors. pcfs was running and everything seemed fine (AK)

  1. WARNING: No PCFS activity for 34.5 minutes.
  2. Check VNC session to see if Field System software is running
  3. Check network connection

Yarragadee 12m:

Disk VSN:HAY-0049

Data volume at beginning:

*18:31:00 Experiment started late. This was due to Katherine e-RemoteCtrl becoming unresponsive and refusing to connect despite multiple restarts. Eventually had to log into pcfs and “pkill” the process and restart e-RemoteCtrl, it repeated the cycle once again before reconnecting properly. (AK)

  1. First Scan for which data was recorded was 076-1839 at 18:39:03
  2. Missed scans 076-1800a through to 076-1833 (starting at 18:33). Missed about 9.8 Gb of data. Though the experiment started at 18:31:00 not sure if it did miss 076-1833?

*22:04 UT WARNING: error an -103 pointing computer tracking errors are too large and error qo -301 warning: onsource status is slewing! (AK)

You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/aov008.1458166052.txt.gz · Last modified: 2016/03/16 22:07 by Jesse Swan