User Tools

Site Tools


handover:aov011

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:aov011 [2016/09/20 17:39]
Jesse Swan
handover:aov011 [2016/09/21 16:45] (current)
Jesse Swan
Line 1: Line 1:
 ====== aov011 ====== ====== aov011 ======
 +Mk5=mode? is " 0x55555555 : 4 : 2 ; " should be 0xffffffff ​ according to wiki and prc file?
 +
  
 **Hobart 12m:** **Hobart 12m:**
Line 8: Line 10:
  
   * Experiment Started okay (Liz)   * Experiment Started okay (Liz)
 +  * 11:15 UT autocorrelation plots not updating, assume due to rapid data transfers in progress (Warren)
  
 **Katherine 12m:** **Katherine 12m:**
Line 15: Line 18:
 Data volume at beginning: 6.090 GB Data volume at beginning: 6.090 GB
  
-  * During setup, ke dbbc needed a power cycle, This fixed the issue of drifting time difference ​and bad auto correl spectra. (AK)+  * 17:30 Experiment started okay (Liz) 
 +  * 17:35 UT Alarm "mark 5 reports sync error. Check clock stability."​ which developed into "​dbbcn:​error connect():dbbc device connection open timed-out"​. Had to halt schedule, ​power cycle the DBBC and fmset to fixFirst good scan 264-1815 (Liz) 
 +  * 18:25 UT Autocorrelations showing distinct but small delta-like peaks along the whole image. Better than before DBBC cycled so just leaving and watching for now. (Liz) 
 +  * 20:44 UT and 21:19UT "​WARNING:​ error an -103 pointing computer tracking errors are too large. WARNING: error qo -301 warning: onsource status is slewing! ALARM: error m5 -900 not while recording or playing"​ Acknowledged alarm, seems not to have affected anything (Liz). 
 +  *  
 + 
 +2016.264.20:​43:​04 WARNING: error m5 -906 mark5 return code 6: inconsistent or conflicting request 
 + 
 + * 00:30 UT system temperature readings overflowing constantly (Warren) 
 + * 05:56 UT failed to get on source before next source commanded ​(Warren)
  
 **Yarragadee 12m:** **Yarragadee 12m:**
  
-Disk VSN: GSFC+017+Disk VSN: HOB+0100
  
-  * Experiment started late as slow changing modules.+  * 17:​52UT ​Experiment started late as slow changing modules ​since yg operator didn't know we needed a new module after he took the r1 module out... First scan: 264-1752 (Liz)
  
  
Line 29: Line 41:
  
 ~~DISCUSSION~~ ~~DISCUSSION~~
- 
/home/www/auscope/opswiki/data/attic/handover/aov011.1474393185.txt.gz · Last modified: 2016/09/20 17:39 by Jesse Swan