User Tools

Site Tools


handover:aov016

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:aov016 [2017/06/20 19:00]
Tiege McCarthy
handover:aov016 [2017/06/21 06:50] (current)
Tiege McCarthy
Line 1: Line 1:
 +====== ohig?? - b17172 ======
 +Katherine: if enough space, continue recording onto the 8TB module (as is AOV). The 2 TB module is for the R4. (Lucia)
 +
 ====== aov016 ====== ====== aov016 ======
  
Line 11: Line 14:
 Katherine 12m: Katherine 12m:
  
-Disk VSN: GSFC+011/​8000 ​(check this when light)+Disk VSN: GSFC+011/​8000
  
 Data volume at beginning: 0.0 GB Data volume at beginning: 0.0 GB
  
-    * 1827UT: Experiment started late due to network being down. Module has VSN incorrectly ​assigned, ​capacity matches though, can't see in webcam because ​the interior light does not turn on.+    * 1827UT: Experiment started late due to network being down. (Patrick) 
 +    * Module has no VSN assigned, ​however ​the label on the module is correct. Need to set module VSN. (Patrick) 
 +    * Weather command '​wx'​ is not working, only returns 19.09, 998.8990. 56.20. (Patrick) 
 +    * 00:30UT - Problems when inserting a new module. Mk5 locked up. Jamie fixed it. Mk5 time was off, had to resync (corrected for 1 second). Lost scans 0011 through 0037. (Lucia)  
 +    * 00:40UT - Weather is now working again (Lucia). 
 +    * 06:50UT - weather sensor is stuck again, gives identical value each scan. Jamie is fixing it, though he still has to write down how(Lucia)
  
 Yarragadee 12m: Yarragadee 12m:
/home/www/auscope/opswiki/data/attic/handover/aov016.1497985233.txt.gz · Last modified: 2017/06/20 19:00 by Tiege McCarthy