User Tools

Site Tools


handover:aov035

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:aov035 [2019/05/14 17:47]
Warren Hankey
handover:aov035 [2019/05/15 11:15] (current)
Md. Momtazur Rahman
Line 5: Line 5:
 Disk VSN: HOB+0125/​32000/​1024 | Data volume at beginning: 15.9 TB Disk VSN: HOB+0125/​32000/​1024 | Data volume at beginning: 15.9 TB
  
-   * 1725UT - Cryo monitoring system not working at Ho (ERROR ma   -4 Device rx timed-out on response). I have replaced the cryomon and rxmon procedures with nops in EXPERIMENT procedure library for the time being, because otherwise it waits for each rx measurement to time out. I have also commented out the rxmon command in the midob procedure in STATION library, as that seems to be causing problems too. (Patrick)+   * 1725UT - Cryo monitoring system not working at Ho (ERROR ma   -4 Device rx timed-out on response). I have replaced the cryomon and rxmon procedures with nops in EXPERIMENT procedure library for the time being, because otherwise it waits for each rx measurement to time out. I have also commented out the rxmon command in the midob procedure in STATION library, as that is also waiting for timeout, and screwing up scan timing. (Patrick) 
 +   * 1725UT - ''​wx''​ command not working. Returning the following errors: (Patrick) 
 +     * ''​wx#​Problem connecting to metserver socket''​ 
 +     * ''​wx#​Illegal error class code: 0xffffffff''​
    * 1730UT - Experiment started OK (Patrick)    * 1730UT - Experiment started OK (Patrick)
 +   * 1842UT - Windstowed from 18:42 - 19:25. (Patrick)
 +     * Missed scans: 134-1841b thru 134-1924b
 +   * 1925UT - Field system time out of sync (''​ERROR sc  -13 setcl: formatter to FS time difference 0.5 seconds or greater''​). Fixed by running ''​sy=run setcl offset''​ in oprin. (Patrick)
 +     * Also at 20:46, 22:47, 22:52
 +   * 2300UT - Fixed rxmon/​cryomon (ERROR ma   -4 Device rx timed-out on response) by resetting TTY distributor with "​reset"​ switch on old S/X MarkIV rack. Serial communications from Hobart to s/x receiver are still patched through this rack. (Warren and Brett)
 +   * 1200UT- Onsource status is slewing (Momtaz)!
  
 **Katherine 12m** **Katherine 12m**
Line 12: Line 21:
 Disk VSN:​HOB+0015 | Data volume at beginning: 0.0 GB Disk VSN:​HOB+0015 | Data volume at beginning: 0.0 GB
  
 +   * 1730UT - No system temperature measurements. Restarted DBBC pc, which fixed it. (Patrick)
    * 1730UT - Experiment started OK (Patrick)    * 1730UT - Experiment started OK (Patrick)
  
Line 19: Line 29:
  
    * 1730UT - Experiment started OK (Patrick)    * 1730UT - Experiment started OK (Patrick)
 +   * 1730UT - no connection to Yg maser (Patrick)
  
  
/home/www/auscope/opswiki/data/attic/handover/aov035.1557856033.txt.gz · Last modified: 2019/05/14 17:47 by Warren Hankey