User Tools

Site Tools


handover:apsg44

This wiki is not maintained! Do not use this when setting up AuScope experiments!

APSG44

Katherine 12m

Disk VSN: GSFC+015/8000 | Data volume at beginning: 0.000 GB

  • 1730UT Experiment started okay (Lucas).
  • Noticed that dbbc=pps_delay isn't stable at Katherine. Changing from 61971 to 61950. This probably requires investigation (Lucas).
  • 23:08 Lost connection to mark5 recorder. reboot of mark5 required (warren)
  • 23:30 missed scans 078-2308 through 078-2327 (w)
  • 23:35 Recording again to mark5 (w)

Yarragadee 12m

Disk VSN: HOB+0051/6000 | Data volume at beginning: 0.000 GB

  • 1730UT Experiment started okay (Lucas).
  • Noticed that dbbc=pps_delay isn't stable at Yarragadee. Changing from 61971 to 61972 and 61973. This probably requires investigation (Lucas). Seems to be that when you ask it is 61972(3) and when the field system polls it is comes back as 61750. Causes alarms. DBBC probably needs reset between experiments.
  • 1155UT Missed scan 079-1148a due to DBBC reconfiguration (Lim).

Hobart 26m

Disk VSN: HOB+0112/16000 | Data volume at beginning: 0.000 GB

  • 1730UT Experiment started okay (Lucas).
  • 1513UT Receiver pressure and temperature became too high (exceeded 6 microns Hg and 100K respectively). Alarm triggered on every scan (Lim). Informed Warren.
  • 1642UT Pressure and temperature issues fixed by Warren (Lim).
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/apsg44.txt · Last modified: 2019/04/02 21:55 by Lucas Hyland