Hobart (12m)

Module: HOB+0042, start pos: 4784.542 GB

• 1753 UT - Experiment started late, but seems to be running ok. (Nick)
• 'mk5=mode?' gives '0 : ext : 0xffffffff : 1 : 2 ; ' which is not in the wiki. (Nick)
• get quite a few 'Tsys value for device id overflowed or was less than zero.' errors. (Nick)

Hobart (26m)

Module: HOB+0033, start pos: 0 GB

• 1753 UT - Experiment started late, but seems to be running ok. (Nick)
• 'mk5=mode?' gives '0 : ext : 0xffffffff : 1 : 2 ; ' which is not in the wiki. (Nick)
• Get a lot of errors as follows:
  • 'ERROR ch -302 v1 frequency does not check with requested value'
  • 'ERROR ch -308 ve total power integrator overflow'
  • 'ERROR ch -317 Total power integrator overflow on IF2'
  • 'ERROR ch -350 The Receiver 20K stage is hotter than 40K'

Katherine

Module: HOB+0119, start pos: 3605.989 GB

• 1753 UT - Experiment started late, but seems to be running ok. (Nick)
• 'mk5=mode?' gives '0 : ext : 0xffffffff : 1 : 2 ; ' which is not in the wiki. (Nick)

Yarragadee

Module: HOB+0130, start pos: 3429.876 GB

• 1753 UT - Experiment started late, but seems to be running ok. (Nick)
• 'mk5=mode?' gives '0 : ext : 0xffffffff : 1 : 2 ; ' which is not in the wiki. (Nick)