User Tools

Site Tools


handover:aua012

This wiki is not maintained! Do not use this when setting up AuScope experiments!

AUA012

Katherine

Beginning disk position: 0 GB on HOB+0083

  • 17:30UT: Experiment Started OK (Tiege)
  • approx 2300 - Power outage at Katherine. Antenna drives off, rfpic server needed restarting. GPIB converter powered off and unable to be power cycled. Some observations made in this period, but without clkoff measurements. (JMc)
  • 2337 - DBBC rebooted itself - power glitch?. Martin arrived at station, fixed GPIB error. Schedule resumed with first good data at 2356. (JMc)
  • All recorded data between 2300 and 2355 is suspect. (JMc)

Yarragadee

Beginning disk position: 0 GB on HOB+0072

  • 17:30UT: Experiment Started OK (Tiege)

Hobart 26m

Beginning disk position: 7489 GB on HOB+0112

  • 17:30UT: Experiment did not start, major problems with the set up. setupsx was getting the critical error (sample rate error as stated in the setup guide), editing the proc file and making it similar too aua011 got rid of this error but introduced others. On-call person was called (Warren) we spent half an hour mucking around with the proc file, Warren eventually hacked together a proc file that seems to work without spitting out errors, however, neither of us are sure it is working correctly. Will wait for Jamie to evaluate at shift change over. Warren edited something to do with the tracks in the proc file. (Tiege)
  • 17:53UT: First good scan 222-1753 (Tiege)
  • 2300: Configuration confirmed as valid as far as frequencies and fanout. Will need to send a revised VEX file to SHAO for the correlation. (JMc)
  • 0000: Track assignment before scan 0019 has an invalid track assignment for the X-band LSB channels. This was corrected at 0012 (JMc).
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/aua012.txt · Last modified: 2016/08/10 00:16 by Jamie McCallum