This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:aua015 [2016/12/07 18:13]
Bryn Emptage
+++ handover:aua015 [2016/12/08 06:25]
Bryn Emptage
@@ Line 1: / Line 1: @@
 ====== aua015 ======
+pre-exp: Manually drudged snp, and proc files from the skd located in /home/oper/ on each machine -- hopefully these are all fine
+**Hobart**
+Module: GSFC+022 (8TB), start pos 0.32 GB
+    * 1800UT - Experiment started ok (JS)
+    * 0243UT - wind stow. missed scans 343-0239 through 343-0258 inclusive (released shortly in between). (Lucia)
+    * 0425UT - wind stow. Started in middle of scan  343-0415, through to  343-0430. (Lucia)
+    * 0553UT - wind stow. missed scans  343-0554 through
+    * Previous wind stow was not recovered from. Had to reset drives etc however hb then immediately wind stowed again (Lucas).
+**Katherine**
+Module: HOB+0131 (32TB), start pos 0 GB
+    * 1800UT - Experiment started ok (JS)
+**Yarragadee**
+Module: IAAE-018 (8TB), start pos 1602 GB
+Module: JIVE-057 (2TB), start pos 0 GB
+     * 1740UT Yg short on modules, will have to reuse IAAE-018 and spill-over onto the 2TB in bank A (JS)
+     * 1800UT - Experiment started ok (JS)
+     * 1952UT recorded data lagging expected by 7.24 GB (JS)
+     * 2053UT recorded data lagging expected by 9.93 GB (JS)
+     * 0503UT recorded data lagging expected by 28 GB (Lucia)