User Tools

Site Tools


handover:aua015

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


aua015

pre-exp: Manually drudged snp, and proc files from the skd located in /home/oper/ on each machine – hopefully these are all fine

Hobart

Module: GSFC+022 (8TB), start pos 0.32 GB

  • 1800UT - Experiment started ok (JS)
  • 0243UT - wind stow. missed scans 343-0239 through 343-0258 inclusive (released shortly in between). (Lucia)
  • 0425UT - wind stow. Started in middle of scan 343-0415, through to 343-0430. (Lucia)

Katherine

Module: HOB+0131 (32TB), start pos 0 GB

  • 1800UT - Experiment started ok (JS)

Yarragadee

Module: IAAE-018 (8TB), start pos 1602 GB

Module: JIVE-057 (2TB), start pos 0 GB

  • 1740UT Yg short on modules, will have to reuse IAAE-018 and spill-over onto the 2TB in bank A (JS)
  • 1800UT - Experiment started ok (JS)
  • 1952UT recorded data lagging expected by 7.24 GB (JS)
  • 2053UT recorded data lagging expected by 9.93 GB (JS)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/aua015.1481171547.txt.gz · Last modified: 2016/12/08 04:32 by Bryn Emptage