User Tools

Site Tools


handover:aua024

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:aua024 [2017/08/17 00:55]
Jesse Swan
handover:aua024 [2017/08/17 05:54] (current)
Jesse Swan
Line 10: Line 10:
   * 18:37 UT Loaded aua022 procedure to suppress error messages, this has a higher sample rate. First valid scan is 288-1840 (Ross)   * 18:37 UT Loaded aua022 procedure to suppress error messages, this has a higher sample rate. First valid scan is 288-1840 (Ross)
   * 22:00 UT Module has run out of free space, being fixed at 9am (Ross)   * 22:00 UT Module has run out of free space, being fixed at 9am (Ross)
-  * 23:49 UT switched to module HOB+0021 (Warren)+  * 23:49 UT Module SOD-038 out of free space, ​switched to module HOB+0021 (Warren) 
 +  * 229.00:57 UT Cryo 20K not reporting properly, pressure OK;  rxp doesn'​t report correctly, receiver is OK SX (Warren) 
 +  * 229.01:08 UT Wind stowed; not on source scans 229-0108 to 229-0139 then recording halted (Warren) 
 +  * 04:31 UT wind stow from 229-0420
  
 **Katherine** **Katherine**
  
-Disk VSN: HOB+0039+Disk VSN: HOB+0039, HOB+0033
  
 Data Volume at Beginning: 0 GB Data Volume at Beginning: 0 GB
  
   * 18:00 UT Experiment started OK (Ross)   * 18:00 UT Experiment started OK (Ross)
 +  * 04:50 UT mk5 died but could ping so Jamie rebooted it. Restarted dim and had to reset ntpq. But okay now. Affected scans: 229-0450, 229-0452 and 229-0454.(Liz)
 +  * 05:13 UT mk5 actually died this time, no ping.Missed scans from 229-0513. Jamie says problem with module. Had to ring Mick to go out and change it over. First scan on new module 229-0552(Liz) ​
  
 **Yarragadee** **Yarragadee**
/home/www/auscope/opswiki/data/attic/handover/aua024.1502931353.txt.gz · Last modified: 2017/08/17 00:55 by Jesse Swan