User Tools

Site Tools


handover:aua026

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:aua026 [2017/09/13 21:58]
Jonathan Rogers
handover:aua026 [2017/09/14 17:08] (current)
Jonathan Rogers
Line 10: Line 10:
   * 18:00 Experiment started OK (Ross)   * 18:00 Experiment started OK (Ross)
   * Maser has been synced but reports a syncerr_gt_3 which can not be corrected in fmset. Jamie says maserdelay is from different maser (Ross)   * Maser has been synced but reports a syncerr_gt_3 which can not be corrected in fmset. Jamie says maserdelay is from different maser (Ross)
 +  * 23:42 Mark 5B syncerr_gt_3 error, ran fmset on hobart but not sure if it will hold. dbbc=pps_delay was jumping around a bit previously, will monitor it. (Patrick)
 +  * 04:17 Weather command missing from midob procedure, added in by Jamie. (Patrick)
 +  * 17:06 He supply pres has dropped to approx 273psi but is climbing again. A similar large drop in pressure then increase occurred between approx 1200-1500 but not so low. Now above 275psi again... (Liz)
  
 **Katherine 12m:** **Katherine 12m:**
Line 18: Line 21:
  
   * 18:00 Experiment started OK (Ross)   * 18:00 Experiment started OK (Ross)
 +  * GPIB has been removed so no clkoff or maserdelay measurements reported (Ross) 
 +  * 23:36 Ke reporting overflowing Tsys measurements in all channels, and autocorrelation spectra looks super weird. Power cycled DBBC, reconfigured,​ and synched times to fix it. Resumed schedule at 00:10 with scan No0082 (Patrick) 
 +  * 00:33 Overflowing Tsys measurements again. Restarted and reconfigured DBBC as before. Resumed at 00:47 with scan No0093. (Patrick) 
 +  * 05:10 Tsys overflowing again, restarted and reconfigured DBBC as before. mk5 wouldn'​t resync, got this error when running fmset: mk5cn: time-out, connection closed. Tried restarting Mark5 (Dimino process), and reconfiguring DBBC again, but no luck. Jamie looking in to it. (Patrick) 
 +  * 06:00 DBBC needs fixing onsite, a card may need replacing. Katherine is out of the experiment, and hopefully will be fixed tomorrow. (Patrick) 
 +  * 07:20 Mick fixed issues with DBBC, good data again at scan no0164. (Bryn) 
 +  * 10:00 network issue, lost connection to mk5ke. getting error: no route to host. power cycling mk5 and reformatting time with fmset. Missed scan no0189 and no0190. (Bryn)
  
 **Yarragadee 12m:** **Yarragadee 12m:**
/home/www/auscope/opswiki/data/attic/handover/aua026.1505339919.txt.gz · Last modified: 2017/09/13 21:58 by Jonathan Rogers