User Tools

Site Tools


handover:aua036

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:aua036 [2018/01/27 09:48]
Noor Md Said
handover:aua036 [2018/01/27 12:53] (current)
Jesse Swan
Line 16: Line 16:
    * 0620 Left for MtP to correct the vacuum pressure. (Atifur)    * 0620 Left for MtP to correct the vacuum pressure. (Atifur)
    * 0650 At MtP vacuum pump started to stabilize the pressure. Pressure dropped to ~5.5 uHg and 70K temp. started dropping at about 1K per min. (Atifur)    * 0650 At MtP vacuum pump started to stabilize the pressure. Pressure dropped to ~5.5 uHg and 70K temp. started dropping at about 1K per min. (Atifur)
-   * 0801 Pressure dropped to 5.4 uHg and 70K temp. reached 111 K. Turned vacuum pump. off and headed ​to uni. (Atifur) ​+   * 0801 Pressure dropped to 5.4 uHg and 70K temp. reached 111 K. Turned vacuum pump. off and headed ​towards ​uni. (Atifur) 
 +   * 12:30 ERROR m5 -23 mk5cn: error opening, etc etc: DIMino must have been running in a terminal on ops8 and I had to restart ops8. DIMino needs to be started in a terminal on the respective field system so that if there is a connection drop between ops8 and the sites it continues to run. Bad/missed scans between 027-1207 and 1242
  
 **Katherine 12m** **Katherine 12m**
/home/www/auscope/opswiki/data/attic/handover/aua036.1517046532.txt.gz · Last modified: 2018/01/27 09:48 by Noor Md Said