User Tools

Site Tools


handover:aua038

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:aua038 [2018/02/28 18:40]
Arwin Kahlon
handover:aua038 [2018/03/01 17:59] (current)
Arwin Kahlon
Line 6: Line 6:
  
    * 1800UT Experiment started OK (Ross)    * 1800UT Experiment started OK (Ross)
 +   * 1430UT - During checklist have noticed alarms are muted and Ho26m alarm has been going off since 0926UT. Drives appear to be stuck. Attempting remote fix now. (Tiege)
 +   * 1500UT - Getting error '​Direct antenna communication unavailable"​ when trying to work with fs. Persisting after restart. May need to try vdesk drive reboot. (Tiege)
 +   * 1530UT - vdesk seems to keep crashing when attempting to switch drives on after an abort. (Tiege)
 +   * 1540UT - Looks like the drives need a manual restart. The 26m is not following on for the next experiment. So I am not going to drive down and perform the manual reset as at best it would result in 1-1.5 hours of extra data and I do not currently feel safe driving down at ~3am half-asleep. (Tiege)
 +   * 1545UT - Bugger it, I will head down. So at least the telescope can be stowed properly in case wind picks up etc. (Tiege)
 +   * 1615UT - Unfortunately it looks like the manual drive reset is not working also. I am unable to switch the power on to the drives. Have spoken to Jamie and we are going to just leave it until Brett can take a look in the morning. (Tiege)
  
 **Katherine 12m** **Katherine 12m**
  
 Disk VSN: HART-032 | Data volume at beginning: 970.542 GB Disk VSN: HART-032 | Data volume at beginning: 970.542 GB
- 
-   * 1800UT Experiment started OK (Ross) 
- 
 Disk VSN: HOB+0121 | Data volume at beginning: 0.000 GB Disk VSN: HOB+0121 | Data volume at beginning: 0.000 GB
  
    * 1838UT Key turned on module in bank B, started recording to HOB+0121 commencing scan No00009 (Ross)    * 1838UT Key turned on module in bank B, started recording to HOB+0121 commencing scan No00009 (Ross)
 +   * 23:56 UT waiting at limit scan No00062 (Warren)
 +   * 2:50 UT No00092-93 waiting at limit (W)
 +   * 5:55 UT No00123 waiting at limit
 +   * 1400UT - Consistent waiting at limit and tracking errors too large warnings (Tiege)
  
 **Yarragadee 12m** **Yarragadee 12m**
  
-Disk VSN: SHAO-017 | Data volume at beginning: 0.00 GB+Disk VSN: SHAO-017/2000 | Data volume at beginning: 0.00 GB recorded 1950 GB 
 +Disk VSN: HOB+0069/​8000 | Data volume at 22:​42:  ​0 GB
  
    * 1800UT Experiment started OK (Ross) ​    * 1800UT Experiment started OK (Ross) ​
 +   * 22:45 UT Changed disks to HOB+0069 (Warren)
 +   * 23:56 UT problem with schedule? waiting at limit for this scan No00062, stop/​restart schedule (W)
 +   * next good scan No00066 (W)
 +   * 2:50 UT scan No00092-93 waiting at limit (W)
 +   * 5:55 UT No00123 waiting at limit
 +   * 1400UT - Consistent waiting at limit and tracking errors too large warnings (Tiege)
 +   * 1713UT - Looks like Yg is not going to have quite enough space on the disk for the experiment. Will miss the last scan (maybe 2) (Tiege)
 +   * 1743UT - Module full. (Tiege)
  
 {{tag>}} {{tag>}}
/home/www/auscope/opswiki/data/attic/handover/aua038.1519843215.txt.gz · Last modified: 2018/02/28 18:40 by Arwin Kahlon