User Tools

Site Tools


handover:aua039

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:aua039 [2018/03/07 18:37]
Jesse Swan
handover:aua039 [2018/03/08 10:41] (current)
Jesse Swan
Line 1: Line 1:
 ====== AUA039 ====== ====== AUA039 ======
 +
 +__**Hobart 26 m**__
 +
 +  - Problem with hydraulic part, out of the experiment
 +  - 06:00 UT Back on with the experiment. Everything seems to be fine. (Katie)
  
 **__Katherine 12m__** **__Katherine 12m__**
Line 7: Line 12:
   - 18:00:00 Experiment started OK (mas).   - 18:00:00 Experiment started OK (mas).
   - 18:08:44 Constantly received warning#​waiting at limit (scan no00003), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 18:13:18 UT(mas)   - 18:08:44 Constantly received warning#​waiting at limit (scan no00003), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 18:13:18 UT(mas)
 +  - 18:41:22, 18:47:14 & 19:​01:​19 ​ WARNING: error 5t -301 don't change mode while recording, use disk_record=off first or (dangerous) use disk_record_ok as the sixth parameter
 +  - 18:41:24 & 18:47:16, 19:01:21 WARNING: error an -103 pointing computer tracking errors are too large
 +  - 18:41:24, 18:47:16 & 19:01:21 WARNING: error qo -301 warning: onsource status is slewing
 +  - 19:37:52 Constantly received warning#​waiting at limit (scan no19-no 22), called Jamie and halt the schedule (19:45:42.7 UT). Schedule resume at scan no 23 (19:49:09 UT)
 +  ​
 +  - 23:51:51 Constantly received warning#​waiting at limit (scan no0065), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 23:54:34 UT(Simin)
 +  - 23:58:38 Constantly received warning#​waiting at limit (scan no0065), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 23:58:48 UT(Simin)
 +  - 01:14:57 Constantly received warning#​waiting at limit (scan no0076), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 01:17:34 UT(Simin)
 +  - 01:22:09 Constantly received warning#​waiting at limit (scan no0079), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 01:24:08 UT(Simin)
 +  - Almost every 10 scans the same errors and warnings as above have occurred.
 +
  
 +  - 09:46 UT  System monitor warning: ​ No Monica data available: pcfsyg.mon.pcfsyg.wth.temperature (Katie)
 +  - 10:35 UT Same errors occur every 10 or so scans. Jamie has said problem is with the schedule file. (Katie)
  
 **__Yarragadee 12m__** **__Yarragadee 12m__**
Line 15: Line 33:
   - 18:00:00 Experiment started OK (mas).   - 18:00:00 Experiment started OK (mas).
   - 18:08:34 Constantly received warning#​waiting at limit (scan no00003), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 18:13:14 UT(mas)   - 18:08:34 Constantly received warning#​waiting at limit (scan no00003), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 18:13:14 UT(mas)
 +  - 18:47:14 WARNING: error 5t -301 don't change mode while recording, use disk_record=off first or (dangerous) use disk_record_ok as the sixth parameter
 +  - 18:47:17 WARNING: error an -103 pointing computer tracking errors are too large
 +  - 18:47:17 WARNING: error qo -301 warning: onsource status is slewing!
 +  - 19:37:52 Constantly received warning#​waiting at limit (scan no19-no 22), called Jamie and halt the schedule (19:45:42.7 UT). Schedule resume at scan no 23 (19:49:09 UT)
 +  - 23:51:41 Constantly received warning#​waiting at limit (scan no0065), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 23:54:34 UT(Simin)
 +  - 01:14:45 Constantly received warning#​waiting at limit (scan no0076), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 01:17:34 UT(Simin)
 +  - 01:17:43 Constantly received warning#​waiting at limit (scan no0079), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 01:24:08 UT(Simin)
 +  -  Almost every 10 scans the same errors and warnings as above have occurred.
  
 +  - 09:46 UT  System monitor warning: ​ No Monica data available: pcfsyg.mon.pcfsyg.wth.humidity (Katie)
 +  - 10:35 UT Same errors occur every 10 or so scans. Jamie has said problem is with the schedule file. (Katie)
/home/www/auscope/opswiki/data/attic/handover/aua039.1520447838.txt.gz · Last modified: 2018/03/07 18:37 by Jesse Swan