User Tools

Site Tools


handover:aua039

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
handover:aua039 [2018/03/08 05:49]
Jesse Swan
handover:aua039 [2018/03/08 10:41] (current)
Jesse Swan
Line 4: Line 4:
  
   - Problem with hydraulic part, out of the experiment   - Problem with hydraulic part, out of the experiment
 +  - 06:00 UT Back on with the experiment. Everything seems to be fine. (Katie)
  
 **__Katherine 12m__** **__Katherine 12m__**
Line 21: Line 22:
   - 01:22:09 Constantly received warning#​waiting at limit (scan no0079), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 01:24:08 UT(Simin)   - 01:22:09 Constantly received warning#​waiting at limit (scan no0079), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 01:24:08 UT(Simin)
   - Almost every 10 scans the same errors and warnings as above have occurred.   - Almost every 10 scans the same errors and warnings as above have occurred.
 +
 +
 +  - 09:46 UT  System monitor warning: ​ No Monica data available: pcfsyg.mon.pcfsyg.wth.temperature (Katie)
 +  - 10:35 UT Same errors occur every 10 or so scans. Jamie has said problem is with the schedule file. (Katie)
  
 **__Yarragadee 12m__** **__Yarragadee 12m__**
Line 36: Line 41:
   - 01:17:43 Constantly received warning#​waiting at limit (scan no0079), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 01:24:08 UT(Simin)   - 01:17:43 Constantly received warning#​waiting at limit (scan no0079), warning:​error an -103 pointing computer tracking errors are too large, warning: error qo -301 warning onsource status is slewing, and alarm: error, f1 previous source in this schedule not reached before new source was commanded at 01:24:08 UT(Simin)
   -  Almost every 10 scans the same errors and warnings as above have occurred.   -  Almost every 10 scans the same errors and warnings as above have occurred.
 +
 +  - 09:46 UT  System monitor warning: ​ No Monica data available: pcfsyg.mon.pcfsyg.wth.humidity (Katie)
 +  - 10:35 UT Same errors occur every 10 or so scans. Jamie has said problem is with the schedule file. (Katie)
/home/www/auscope/opswiki/data/attic/handover/aua039.1520488188.txt.gz · Last modified: 2018/03/08 05:49 by Jesse Swan