User Tools

Site Tools


handover:aua047

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:aua047 [2018/12/04 21:59]
Tiege McCarthy
handover:aua047 [2018/12/05 15:42]
Tiege McCarthy
Line 9: Line 9:
            * Fixed problem by resetting the drive pc (vdesk would not load sys26m which was a large diagnostic) with command: rem_reboot -r rakbus sys26m. For good measure, also opened vdesk with sys26m and abort, abort-ed. Then reset field system and voila, it worked. note - found this fix on the ra-wiki (not auscope wiki).            * Fixed problem by resetting the drive pc (vdesk would not load sys26m which was a large diagnostic) with command: rem_reboot -r rakbus sys26m. For good measure, also opened vdesk with sys26m and abort, abort-ed. Then reset field system and voila, it worked. note - found this fix on the ra-wiki (not auscope wiki).
            * First scan is 3338-1857, all previous scans missed.            * First scan is 3338-1857, all previous scans missed.
 +   * sx receiver parameter pres out of range showed up multiple times from 1414UT. However the values on the live page seem to be fine (Prad).
  
 **Katherine 12m** **Katherine 12m**
Line 15: Line 16:
  
    * Experiment started one scan late, missed scan 338-1730 (Lucas).    * Experiment started one scan late, missed scan 338-1730 (Lucas).
 +   * 10:30 UT, started getting alarms about:
 +
 +2018.339.10:​52:​46.01?​ERROR st   -5 Error return from antenna, see Mbus error.
 +2018.339.10:​53:​01.01?​ERROR st -998 reading SystemClock1
 +2018.339.10:​53:​01.01?​ERROR st -999 TCP/IP connection was closed by remote peer
 +
 +and antenna=open,​ antenna=operate did not solve the issue. I first reset the drives on timeke, and when that also failed to work after open/​operate,​ rebooted the system in timeke. Then after antenna=open,​ antenna=operate this worked. Normally this is not necessary but this time it was - Lucas.
  
 **Yarragadee 12m** **Yarragadee 12m**
/home/www/auscope/opswiki/data/pages/handover/aua047.txt · Last modified: 2018/12/05 15:42 by Tiege McCarthy