User Tools
handover:aua047
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
handover:aua047 [2018/12/05 10:59] Tiege McCarthy |
handover:aua047 [2018/12/05 15:42] (current) Tiege McCarthy |
||
|---|---|---|---|
| Line 9: | Line 9: | ||
| * Fixed problem by resetting the drive pc (vdesk would not load sys26m which was a large diagnostic) with command: rem_reboot -r rakbus sys26m. For good measure, also opened vdesk with sys26m and abort, abort-ed. Then reset field system and voila, it worked. note - found this fix on the ra-wiki (not auscope wiki). | * Fixed problem by resetting the drive pc (vdesk would not load sys26m which was a large diagnostic) with command: rem_reboot -r rakbus sys26m. For good measure, also opened vdesk with sys26m and abort, abort-ed. Then reset field system and voila, it worked. note - found this fix on the ra-wiki (not auscope wiki). | ||
| * First scan is 3338-1857, all previous scans missed. | * First scan is 3338-1857, all previous scans missed. | ||
| + | * sx receiver parameter pres out of range showed up multiple times from 1414UT. However the values on the live page seem to be fine (Prad). | ||
| **Katherine 12m** | **Katherine 12m** | ||
/home/www/auscope/opswiki/data/attic/handover/aua047.1544007562.txt.gz · Last modified: 2018/12/05 10:59 by Tiege McCarthy
Page Tools
