User Tools

Site Tools


handover:aug002

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:aug002 [2015/01/17 10:17]
Warren Hankey
handover:aug002 [2015/01/18 00:14] (current)
cjordan
Line 29: Line 29:
  
 08:12 UT    - back on source for scan 017-0815, average wind has decreased for the moment, still some strong gusts. (Warren) 08:12 UT    - back on source for scan 017-0815, average wind has decreased for the moment, still some strong gusts. (Warren)
 +
 08:17 UT  -stowed immediately after  017-0815, stowed for scan 017-0817 (W) 08:17 UT  -stowed immediately after  017-0815, stowed for scan 017-0817 (W)
 +
 08:27 UT - back again for scan 017-0833, just under stow threshold, antenna being buffeted (W) 08:27 UT - back again for scan 017-0833, just under stow threshold, antenna being buffeted (W)
 +
 08:38 UT - stowed during scan 017-0837a, wind increasing (W) 08:38 UT - stowed during scan 017-0837a, wind increasing (W)
 +
 08:43 UT  - recording halted, recorded scans 017-0840a, 017-0842, 017-0843 no good (W) 08:43 UT  - recording halted, recorded scans 017-0840a, 017-0842, 017-0843 no good (W)
-09:18 UT    -sced resumed, first scan  017-0924 then wind stowed during scan  017-1006, recorded scans 017-1009, ​ 017-1010 no good  (W) 
  
 +09:18 UT    -sched resumed, first scan  017-0924 then 10:07; wind stowed during scan  017-1006, recorded scans 017-1009, ​ 017-1010 no good  (W)
  
 +10:16 UT  -sched resumed, first scan 017-1021 (W)
 +
 +20:23 UT - A gust of wind triggered the autostow. This affects the tail end of source 017-2021, and nothing is recorded until 017-2032a (Chris).
 +
 +21:07 UT - Another gust triggered autostow at 21:02. Released at 21:07.
  
 **Katherine 12m:** **Katherine 12m:**
Line 44: Line 53:
  
 23:15UT: DBBC attenuation levels were incorrect, restarted dbbc software, fixed the problem (Imogen) 23:15UT: DBBC attenuation levels were incorrect, restarted dbbc software, fixed the problem (Imogen)
 +
 23:30UT: Mark 5 would not get bank status, restarted mark 5, resynced with fmset, all good (Imogen) 23:30UT: Mark 5 would not get bank status, restarted mark 5, resynced with fmset, all good (Imogen)
 +
 23:45UT: lost connection with pcfske, could not get back into VNC session, but was able to ssh into pcfske and run field system from a remote terminal, everything working ok (connected to eremotectrl ok), except for the lack of VNC session (Imogen) 23:45UT: lost connection with pcfske, could not get back into VNC session, but was able to ssh into pcfske and run field system from a remote terminal, everything working ok (connected to eremotectrl ok), except for the lack of VNC session (Imogen)
 +
 23:53UT: didn't get time to do five point check due to mark 5/dbbc/pcfs problems (Imogen) 23:53UT: didn't get time to do five point check due to mark 5/dbbc/pcfs problems (Imogen)
 +
 +21:10 UT: Antenna was apparently stuck for a few scans:
 +
 +2015.017.21:​08:​35.11#​trakl#​Antenna stuck
 +
 +2015.017.21:​08:​52.14#​trakl#​Antenna stuck
 +
 +2015.017.21:​09:​07.11#​trakl#​Antenna stuck
 +
 +... but came out of this state when a new scan arrived, before I had time to fix it (Chris)
  
  
Line 55: Line 77:
 Data volume at beginning: 20GB// Data volume at beginning: 20GB//
  
-00:22UT: Connection with eremotectrl lost - monitoring from pcfs only (Imogen)+00:22 UT: Connection with eremotectrl lost - monitoring from pcfs only (Imogen
 + 
 +22:27 UT: DBBC channels 05 - 09 (X-band) have high Tsys values. Probably RFI. This has also been noted in a checklist. (Chris)
  
 {{tag>}} {{tag>}}
/home/www/auscope/opswiki/data/attic/handover/aug002.1421489865.txt.gz · Last modified: 2015/01/17 10:17 by Warren Hankey