User Tools

Site Tools


handover:aum008

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:aum008 [2018/09/12 22:16]
Atifur R. Khan
handover:aum008 [2018/09/13 17:48] (current)
Atifur R. Khan
Line 5: Line 5:
 Katherine 12m Katherine 12m
  
-Disk VSN: HOB+0120/31656.656 ​| Data volume at beginning: ​GB+Disk VSN: HOB+0120/32000 | Data volume at beginning: ​343.34 ​GB
  
    * Experiment started okay (Prad).    * Experiment started okay (Prad).
 +   * 0104 - resynched DBBC/Mark5. Error linked to work in the maser room. (JMc)
 +   * 0218 - another fmset
 +   * 0700 - Many clock breaks in the interim(JMc)
 +   * ~10:30 - New AC is now in operation, maser room should be temperature stabilised within a few hours. (JMc)
 +   * 10:59 UT reconfigured the dbbc. Affected scans: 256-1059, 256-1101 (Simin)
 +   * 11:30 UT ALARM: error fl   -1 previous source in this schedule not reached before new source was commanded. (Simin)
  
 Yarragadee 12m Yarragadee 12m
  
-Disk VSN: HOB+0123/​31649.22 | Data volume at beginning: ​GB+Disk VSN: HOB+0123/​31649.22 | Data volume at beginning: ​350.78 ​GB
  
    * Experiment started okay (Prad).    * Experiment started okay (Prad).
 +   * 0100 - Phase cal temperature setpoint being altered to 50 degrees.
  
 Hobart 12m Hobart 12m
  
    * Experiment started OK (Prad).    * Experiment started OK (Prad).
 +   * ~0100 - Wind stow
  
/home/www/auscope/opswiki/data/attic/handover/aum008.1536790596.txt.gz · Last modified: 2018/09/12 22:16 by Atifur R. Khan