This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:aum010 [2018/09/24 03:53]
Warren Hankey
+++ handover:aum010 [2018/09/25 13:03] (current)
Pradyumna Kiran Kummamuru
@@ Line 1: / Line 1: @@
 ====== AUM010 ======
+**Hobart 12m**
+Disk VSN: Flexbuffhb | Data volume at beginning: N/A
+   * Schedule drudged and processed using snp2flexbuff.sh. Schedule has been edited to include the SAR scan at 19:18:08. Scans 267-1916 and 267-1919 have been skipped. (JMc)
+   * To set up the DBBCs/recorders, please use "aum007.setup.py" but **do not run this until after mv022 completes!** The reason is that both experiments are using the DBBCHO and flexbuff for the recording.
+   * 230149 - DBBCHO restarted with correct v105E_2 software. (JMc)
+   * ~0400 Network to the antenna failed. Fixed by power cycling media adaptor, then rebooting antenna controller. (JMc)
+**Katherine 12m**
+Disk VSN: HOB+0120/32000 | Data volume at beginning: 22862.928 GB (9138)
+   * Experiment started OK (Prad).
+**Yarragadee 12m**
+Disk VSN: HOB+0123/32000 | Data volume at beginning:  30686.115 GB (1314)
+   * Experiment started okay (JMc).
+   * 23:30 - 2339. Windstows at Yarragadee, but due to malfunctioning anemometer. windyg has been powered off to clear the bogus windstow, (JMc)
 {{tag>}}