User Tools

Site Tools


handover:aum024

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
handover:aum024 [2021/01/20 17:13]
Jayender Kumar
handover:aum024 [2021/01/21 18:20] (current)
Katie Vandorou
Line 1: Line 1:
 ====== AUM024 ====== ====== AUM024 ======
 +
 +Schedule did not start until 2300. Yg will need to finish early (~1800 UT) to set up for R4. 
  
 **Hobart 12m** **Hobart 12m**
  
 Disk VSN: flexbuffhb Disk VSN: flexbuffhb
-  * 1800UT - Experiment ​started ​okay (Jay)+  * started ​Ok (JMc)
  
  
Line 11: Line 13:
 Disk VSN: flexbuffke Disk VSN: flexbuffke
  
-  * 1800UT ​Experiment started okay (Jay)+  * Started Ok (JMc) 
 +  * Note - DBBC# summary is showing Sampler 1 as bad - this is ok for now, just down to a reporting threshold issue (JMc) 
 +  * Nuisance errors about antcn timeout (st -999). Seems to be timing out by fractions of a millisecond and restored immediately afterwards (JMC) 
 +  * 0923 UT - Power failure (?). Drives off, DBBC rebooted. GPIB also locked, ditto CNS clock (JMc).  
 +  * 1040 UT Schedule resumed ​(JMc)
  
  
 **Yarragadee 12m** **Yarragadee 12m**
  
-Disk VSN: HOB+0104/​16000 | Data volume at beginning: ​350 GB (R1982)+Disk VSN: HOB+0104/​16000 | Data volume at beginning: ​6781.87 ​GB
  
-  * 1800UT - Experiment started okay (Jay)+  * Started ok (HJMc) 
 +  * 1800 UT - Experiment stopped and changed to r4 at 1800UT
  
  
/home/www/auscope/opswiki/data/attic/handover/aum024.1611162794.txt.gz · Last modified: 2021/01/20 17:13 by Jayender Kumar