User Tools

Site Tools


handover:aust35

This wiki is not maintained! Do not use this when setting up AuScope experiments!

AUST35

  • Hb: disk_pos: 4754.8 GB module: HOB+0039: bank swap necessary. Switched to module HOB+0107 at 05:14:20. No scans lost. New disk_pos: 10946 GB. First scan of aust35 on this module: 201-0515 (source 0727-115)
  • Hb: run late on automatic schedule changeover. Aust34 lasted too long. Missed first 3 scans (onsource SLEWING) trying to catch upcd. First valid scan: 201-0003 (source CTA26).
  • Ke: disk pos: 800.2 GB module: HOB+0088
  • Ke: run late on automatic schedule changeover. Aust34 lasted too long. Missed first 3 scans (onsource SLEWING) trying to catch upcd. First valid scan: 201-0003 (source CTA26).
  • Ke: one bad channel
  • Yg disk_pos: 5314.6 GB, module: HOB+0115
  • Yg: missed first 3 scans, aust34 was running late. first valid scan: First valid scan: 201-0003 (source CTA26).
  • Yg: alarm 2014.201.00:37:24 Delay difference is 11.352 us

2014.201.00:37:24 ALARM: Large difference between formatter and maser delays. Check for stability of new offset. Only one delay difference is that huge. Now its fine again (0.3 us)

You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/aust35.txt · Last modified: 2014/08/06 05:57 by Jim Lovell