User Tools
handover:c1706_v1706
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
handover:c1706_v1706 [2017/12/03 02:57] Noor Md Said |
handover:c1706_v1706 [2017/12/03 23:35] (current) Bryn Emptage |
||
|---|---|---|---|
| Line 8: | Line 8: | ||
| * 00:00 UT - experiment started OK (Patrick) | * 00:00 UT - experiment started OK (Patrick) | ||
| - | Lots of windstows, check with 'grep wind c1706ho.log' | + | * 00:00 UT - Lots of windstows, check with 'grep wind c1706ho.log' |
| * 02:55 UT - Telescope does not reach stow sometimes when windstowing. Keep an eye on the live page, and issue an extra 'source=stow' command if the elevation is not changing. (Patrick) | * 02:55 UT - Telescope does not reach stow sometimes when windstowing. Keep an eye on the live page, and issue an extra 'source=stow' command if the elevation is not changing. (Patrick) | ||
| + | * received multiple warning of windstows, error m5 -900:already off, and error f1 -1 previous source in this schedule not reached before new source was commanded (04:46:10 UT till 07:01:38 UT) (mas) | ||
| + | * At 07:00:00 UT, Warren called and halted the schedule for Hobart 26m (mas) | ||
| + | * Started recording again at 07:24:37 UT (mas) | ||
| + | * Received Alarm:error f1 -1 previous source in this schedule not reached before new source was commanded at 10:31:30 UT,10:34:24 UT, 10:38:23 UT, 10:40:52 UT, 10:44:02 UT, 10:45:48 UT, 10:50:12 UT, 10:52:24 UT, 10:54:20 UT, 10:57:12 UT, 10:59:20 UT,11:02:06 UT, 11:09:44 UT, 11:18: 13 UT and 11:20:06 UT. The left and right drives are OFF. Hydraulics fault/OFF. Have tried remote reset via the v-desk terminal on newsmerd, but activity idle. Have informed Warren and he go to Mt Pleasant. (mas) | ||
| + | * Halt the schedule at 11:21:44 UT (mas) | ||
| + | * Missed scans from scan 337-1033 to 337-1146 (mas) | ||
| + | * Start recording again at 11:50:09 UT (mas) | ||
| + | * 1806 UT missed scan 337-1806b due to slow slew speed. (Bryn) | ||
| + | * 1909 UT missed scan 337-1909 due to slow slew speed. (Bryn) | ||
| + | * 2330 UT missed scan 337-2327 missed, probably same slow slewing (Liz) | ||
| Line 19: | Line 29: | ||
| * 00:00 UT - experiment started OK (Patrick) | * 00:00 UT - experiment started OK (Patrick) | ||
| + | * 2334 UT - at 22:00 UT approx. delay difference appears to start drifting rapidly (linear-like drift), may have stabilised at ~ -0.335 in the last few scans. Will monitor until end of experiment (in about 20mins), then reconfigure dbbc in break. (Liz) | ||
| Line 28: | Line 39: | ||
| * 00:00:00 UT - experiment started OK (Patrick) | * 00:00:00 UT - experiment started OK (Patrick) | ||
| + | * 1800 UT - Humidity Sensor giving nonsense readings again (Bryn) | ||
/home/www/auscope/opswiki/data/attic/handover/c1706_v1706.1512269834.txt.gz · Last modified: 2017/12/03 02:57 by Noor Md Said
Page Tools
