This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:crds81 [2016/01/27 18:14]
Tiege McCarthy
+++ handover:crds81 [2016/01/28 16:54] (current)
Tiege McCarthy
@@ Line 7: / Line 7: @@
      * 17:20 Drivepc restarted in time for experiment (JS)
      * 17:20 70K stage at 110, 40k stage at 80, pressure at 4.9 will need vacuuming in the morning (JS)
+     * 07:22 UT - Jim reported that the received had been cooled. The stages are currently: 79 at 70K and 59 at 20K. (Ellen)
+     * 07:25 UT - Can't connect to newsmerd on monica so I can't check the He supply pressure. (Ellen)
+     * 09:39 UT - S/X receiver stages are now at 67 and 53. (Ellen)
+     * 09:40 UT - Tsys values in bands 01 - 08 are approx 110. This is probably due to the current storm. (Ellen)
+     * 11:30 UT - Tsys values are back to normal. (Ellen)
+     * 13:36 UT - Status monitor reporting date as 1969.293.01.48 UT, schedule appears unaffected. (Bryn)
-**Hobart**
+**Hobart 12**
 Module: HOB+0075, 6264 GB
      * 17:39 UT - Experiment started OK (JS)
+     * 09:40 UT - Tsys values all way too high, mostly consistently around 200. This is probably due to the current storm, although Ho system temps are only up to ~110. (Ellen)
+     * 11:33 UT - X-band has cooled to normal temps but S-band is still too high. (Ellen)
+     * 16:37 UT - Module ran out of space - no second module to switch to. Experiment Halted. (Bryn)
 **Katherine**