User Tools

Site Tools


handover:crds96

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:crds96 [2018/06/21 00:17]
Warren Hankey
handover:crds96 [2018/06/21 16:18] (current)
Patrick Yates
Line 1: Line 1:
 ====== CRDS96 ====== ====== CRDS96 ======
  
-__Hobart 26m__+**Hobart 26m**
  
 Disk VSN: HOB+0119/​32000 | data volume at the begining 19828.475 GB. Disk VSN: HOB+0119/​32000 | data volume at the begining 19828.475 GB.
Line 9: Line 9:
 When experiment started, received " WARNING: error qo -301 warning: onsource status is slewing!"​ for each scan. All clocks at FMSET are synchronise. ​ When experiment started, received " WARNING: error qo -301 warning: onsource status is slewing!"​ for each scan. All clocks at FMSET are synchronise. ​
  
 +23:30UT - Autocorrelation spectra not updating. Lucas fixed based on similar error where procedure file didn't include checkmk5 command (Ross).
  
 +13:45UT - 70K stage at ~90K and climbing, pressure at 3.6 microns mercury. Heading out to Mt Pleasant to fix. (Patrick)
  
-__Katherine 12m__+**Katherine 12m**
  
 Disk VSN: HOB +0088/8000 | data volume at the begining 1.795 GB. Disk VSN: HOB +0088/8000 | data volume at the begining 1.795 GB.
Line 23: Line 25:
 00:08UT - Noticed difference in procedure file between crds96 and previous crds experiments and corrected this error; missed scan no0394. Error still present, leaving for Warren to look at later (Ross). 00:08UT - Noticed difference in procedure file between crds96 and previous crds experiments and corrected this error; missed scan no0394. Error still present, leaving for Warren to look at later (Ross).
  
 +13:29UT - Fixed continuous cal not enabled error by changing ''​cont_cal=off''​ to ''​cont_cal=on''​ in the ''​setup01''​ function of the procedure file, based off the previous crds95 procedure file. (Patrick)
  
-__Yarragadee 12m__ 
  
-Disk VSN: GSFC+022/​8000 | data volume at the begining 1.923 GB. +**Yarragadee 12m** 
 + 
 +Disk VSN: GSFC+022/​8000 | data volume at the begining 1.923 GB. Recorded 7469.724 GB on this disk. 
 + 
 +Disk 2 VSN: BKG-0065 | data volume at the begining 0.0 GB. 
  
 1800UT- Experiment started OK (mas) 1800UT- Experiment started OK (mas)
 +
 +16:09UT - Manually drudged summary files. Noticed that data for Yg & Ho is 8064GB, while module in mk5 is 8000GB. Called up Yg and swapped modules inbetween scans. Resumed schedule with scan No0551 at 16:11:58 (1:48 into scan). (Patrick)
  
  
/home/www/auscope/opswiki/data/attic/handover/crds96.1529540270.txt.gz · Last modified: 2018/06/21 00:17 by Warren Hankey