User Tools

Site Tools


handover:crds96

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


CRDS96

Hobart 26m

Disk VSN: HOB+0119/32000 | data volume at the begining 19828.475 GB.

1800UT- Experiment started OK (mas)

When experiment started, received “ WARNING: error qo -301 warning: onsource status is slewing!” for each scan. All clocks at FMSET are synchronise.

23:30UT - Autocorrelation spectra not updating. Lucas fixed based on similar error where procedure file didn't include checkmk5 command (Ross).

13:45UT - 70K stage at ~90K and climbing, pressure at 3.6 microns mercury. Heading out to Mt Pleasant to fix. (Patrick)

Katherine 12m

Disk VSN: HOB +0088/8000 | data volume at the begining 1.795 GB.

1800UT- Experiment started OK (mas)

When experiment started, received “Warning: error tc -301 continuous cal not enabled for dbbc” for each scan

23:21UT - After discussion with Warren decided to reboot dbbc to see if that fixed continuous cal error. Halted after scan no0385, first good scan no0388 (Ross).

00:08UT - Noticed difference in procedure file between crds96 and previous crds experiments and corrected this error; missed scan no0394. Error still present, leaving for Warren to look at later (Ross).

13:29UT - Fixed continuous cal not enabled error by changing cont_cal=off to cont_cal=on in the setup01 function of the procedure file, based off the previous crds95 procedure file. (Patrick)

Yarragadee 12m

Disk VSN: GSFC+022/8000 | data volume at the begining 1.923 GB.

1800UT- Experiment started OK (mas)

/home/www/auscope/opswiki/data/attic/handover/crds96.1529595231.txt.gz · Last modified: 2018/06/21 15:33 by Patrick Yates