This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

--- handover:crf107 [2018/06/27 13:07]
Simin Salarpour
+++ handover:crf107 [2018/06/27 23:15] (current)
Tiege McCarthy
@@ Line 4: / Line 4: @@
 Disk VSN: HOB+0119/32000 | Data volume at beginning: 27869.224 GB
+(Tiege)
    * 1730UT-Experiment started OK (Simin)
    * 1305UT - rxp is not providing focus position info, instead it is returning error about connection with remote host lost. Live page says receiver position is correct. (Tiege)
+   * 1400UT - Have arrived at MtP, going to open the valve and cool the S/X receiver. Also needed to put a module in for the next experiment. (Tiege)
+   * 1435UT - MK5 crashed when new module went in (despite me waiting until between scans to turn the key on the second bank). Power-cycled the mk5 and everything is back running. No data was recorded between 1435UT and 1450UT (missed scan 178-1437). (Tiege)
+   * 1600UT - Heading back to Sandy Bay, cooled receiver down to 65-70K, will likely need to be done again in the morning. (Tiege)
+   * 1700UT - Fixed issue of ops8 not having sound, needed a reboot for it to begin working correctly. (Tiege)
+   * 1711UT - seems like it only temporarily fixed the sound. Have tried different speakers, they also do not seem to work. Going to rely on the SMS to mobile for now. (Tiege)
+   * 1737UT - pressure reading from cryomon went negative for a few scans in a row. Seems to have come right, I am putting it down to the dodgy sensor. (Tiege)