User Tools

Site Tools


handover:crf98

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
handover:crf98 [2017/01/19 05:43]
Jesse Swan
handover:crf98 [2017/01/19 17:06] (current)
Jesse Swan
Line 26: Line 26:
  
   * 17:30UT Experiment started OK (Ross)   * 17:30UT Experiment started OK (Ross)
 +  * 16:00UT Lost connection to yarragadee, network problem. Yg VPN needed a reset. (Arwin)
  
 **Hobart 26** **Hobart 26**
Line 33: Line 34:
   * 03:50UT Vacuum pressure is at 3.9 (should be <3.5). Told Brett and he will take care of it. (Lucia)   * 03:50UT Vacuum pressure is at 3.9 (should be <3.5). Told Brett and he will take care of it. (Lucia)
   * 05:42UT Vacuum pressure was low (3.5) now is 3.9 again. Spoke to Brett. As long as the temperature (70k) is not rising, we are good. 70k stage has been stable at about 54K over the last two hours. (Lucia)   * 05:42UT Vacuum pressure was low (3.5) now is 3.9 again. Spoke to Brett. As long as the temperature (70k) is not rising, we are good. 70k stage has been stable at about 54K over the last two hours. (Lucia)
 +  * 15:00UT Have been getting the following errors: " ERROR ib   -4 GPIB Device time-out on response ca" and "ERROR qy   -1 Error in response from counter"​. Consulted with Warren, he said not to worry about these. (Arwin)
  
  
/home/www/auscope/opswiki/data/attic/handover/crf98.1484804612.txt.gz · Last modified: 2017/01/19 05:43 by Jesse Swan