User Tools
handover:hob008
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
handover:hob008 [2016/11/18 23:14] Ross Turner |
handover:hob008 [2016/11/19 12:40] (current) Ross Turner |
||
|---|---|---|---|
| Line 7: | Line 7: | ||
| * 2000UT Data not being recorded initially, reloaded schedule and procedure files (Ross) | * 2000UT Data not being recorded initially, reloaded schedule and procedure files (Ross) | ||
| - | * 22:30 to 23:06UT, getting mk5cn time-out connection closed errors, restarted dimino and dbbc (and re-synced) but continued getting errors. Called on-call person, they recommended editing checkmk5 file in pfmed to exclude /sys/... command which produced autocorrelations by commenting out with ", but this didn't work either. Re-started schedule as the error was deemed to be benign. Alarm was commented out of alarm_control (Lucas/Ross) | + | * 0055 - Restarted DBBC Control program as clkoff/dbbc=pps_delay readings indicated a loss of synch. (JMc). |
| + | * Missed scans 324-0420, 324-0417 and 324-0422 due to 'previous source in the schedule not reached before new source was commanded ...'. Alarm did not go off for this (Lucas) | ||
| + | * 0830UT - Disc pos ~200 GB behind, holding steady. (Ellen) | ||
| + | * 0845UT - Hg pressure still at about 4.0 (Lucas reported it had been a little high). Appears stable, probably just due to hot weather. Continuing to monitor. (Ellen) | ||
| + | * 0900UT - Hg pressure fallen down to 3.1 microns. (Ellen) | ||
| + | * 1040UT - Module filled up and automatically switched to recording onto HOB+0120, which already had 9901 GB on there. First scan on module was 324-1041. 2092 GB recorded to HOB+0029. (Ellen) | ||
| **Hobart 12m** | **Hobart 12m** | ||
| Line 16: | Line 22: | ||
| * 1900UT Experiment started OK (Ross) | * 1900UT Experiment started OK (Ross) | ||
| + | * 22:30 to 23:06UT, getting mk5cn time-out connection closed errors, restarted dimino and dbbc (and re-synced) but continued getting errors. Called on-call person, they recommended editing checkmk5 file in pfmed to exclude /sys/... command which produced autocorrelations by commenting out with ", but this didn't work either. Re-started schedule as the error was deemed to be benign. Alarm was commented out of alarm_control (Lucas/Ross) | ||
| + | * 0215 UT The diskpack that was being recorded to was marked as 'Faulty', and there was a lag between accepting a 'disk_record=off' command, which was longer than the 500ms window the fs allowed, thereby giving the mk5cn time-out error. Jamie was able to correct this and the alarm was un-commented. (Lucas/Jamie) | ||
| + | * 0830UT - Disc pos ~130 GB behind, holding steady. (Ellen) | ||
| + | * 1040UT - Module filled up and automatically switched to recording onto HOB+0120, which already had 9901 GB on there. First scan on module was 324-1041. 2092 GB recorded to HOB+0029. (Ellen) | ||
/home/www/auscope/opswiki/data/attic/handover/hob008.1479510876.txt.gz · Last modified: 2016/11/18 23:14 by Ross Turner
Page Tools
