User Tools

Site Tools


handover:mv003

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


MV003

All antennas are required onsource for valid data so when Katherine had it's problems this caused the whole experiment to start v late.

Hobart12

Disk module HOB+118/16000, start position 0.000GBs

  • Experiment started late

Katherine

Disk module HOB+0130/32000, start position 0.000GBs

  • Experiment started late.
    • Dbbc required power-cycling;
    • system monitor reported LO status UNLOCKED! however after rxmon was restarted this proved to be incorrect.
    • Drives did not turn on, was getting error st -8 power on time-out. On HMI “E STOP” was red, indicating that either water or an animal had tripped the emergency stop and needed to call Mick so he could re-start.

Yarragadee

Disk module HOB+0128/32000, start position 0.000GBs

  • Experiment started late.
    • DBBC needed poser cycling.
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/mv003.1483757346.txt.gz · Last modified: 2017/01/07 02:49 by Lucas Hyland