User Tools

Site Tools


handover:ohg108

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
Last revision Both sides next revision
handover:ohg108 [2017/02/22 18:20]
Ross Turner
handover:ohg108 [2017/02/23 02:57]
Ross Turner
Line 2: Line 2:
  
  
 +
 +**Hobart 12m:**
 +
 +Disk VSN: HOB+0059
 +
 +  * 17:30UT Exp started OK. First source 1334-127. (Arwin)
 +  * 22:18UT missed a scan due to dbbc resync (power cycled wrong one), there'​s a small clock jump (-0.004 usec). Missed scan 053-2217 (Bryn)
 +
 +
 +Data volume at beginning: 0 GB
 +
 +**Katherine 12m:**
 +
 +Disk VSN: BKG-0015
 +
 +Data volume at beginning: 0 GB
 +
 +  * 18:01UT Exp started late, issues with the DBBC and the schedule. First scan is 053-1801, source 0727-115. (Arwin)
 +  * 19:18UT Missed scan 053-1918 to reconfigure DBBC. The comments.py should auto pick this. (Arwin)
 +  * 21:30UT Antenna got stuck, released at 22:05UT with antenna=open and antenna=operate. Scans affected are 053-2130 through 053-2204 (inclusive) (Bryn)
 +  * 22:15UT delay drifting, resetting DBBC missed scans 053-2215 through 053-2222.
 +  * 00:50UT Bad dbbc delay. Delay difference seems okay - not drifting, but if the alarms continue, I'll reset the DBBC again. (Bryn)
 +  * 01:25UT resetting dbbc. Missed scans 054-0125b and 054-0129 (Bryn)
 +  * 01:29UT Problems with dbbc, halting schedule (Bryn)
 +  * 02:25UT Have tried full power cycling dbbc several times, still can't get consistent clkoff from machine - fmset no use. Talked to Jim, Warren and Brett - stowing telescope and keeping schedule halted. Can't retrieve system temperatures,​ so no point continuing until issue is resolved. (Bryn)
 +
 +
 +**Yarragadee 12m:**
 +
 +Disk VSN: HOB+0041
 +
 +Data volume at beginning: 0 GB
 +
 +  * 18:31UT Exp started late, issues with the mk5 and schedule.First scan 053-1831 and source 1057-797. Mk5 was unresponsive for while and the later it wouldn'​t record data. Typing '​schedule='​ would give a ''​no scans''​ error and the dish would find the source but not record. Spammed setupsx and schedule=, it came right on the third or so attempt. (Arwin)
  
  
/home/www/auscope/opswiki/data/pages/handover/ohg108.txt · Last modified: 2017/02/23 11:09 by Ross Turner