User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


Hobart 26m

Disk VSN: CURT+101/6000/1024 | Data volume at beginning: 4952.454147264 GB

  • The ifc and ifd were not on default values which lead to a 'error di -101 no default for if input' when 'setupsx' was entered during the setup. Values from the earlier (ohg113) summary file were copied onto the current one to resolve the issue (Prad).
  • 1607UT - Large difference between formatter and maser delays (Prad).
  • 1730UT - Experiment started OK (Prad).
  • 1800UT - Formatter to FS time difference 0.5 seconds or greater. Scan 310-1800 may have been affected (Prad).
  • 1914UT - Formatter to fs time difference 0.5 seconds or greater (Prad).

Katherine 12m

Disk VSN: NRAO-180/2400 | Data volume at beginning: 0 GB

* 1730UT- Experiment started OK (Prad).

Yarragadee 12m

Disk VSN: HOB+0025/6000 | Data volume at beginning: 0 GB

  • 1730UT - Experiment started OK (Prad).
/home/www/auscope/opswiki/data/attic/handover/ohg114.1541531799.txt.gz · Last modified: 2018/11/06 19:16 by Pradyumna Kiran Kummamuru