User Tools

Site Tools


handover:ohg114

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


OHG114

Hobart 26m

Disk VSN: CURT+101/6000/1024 | Data volume at beginning: 4952.454147264 GB

  • The ifc and ifd were not on default values which lead to a 'error di -101 no default for if input' when 'setupsx' was entered during the setup. Values from the earlier (ohg113) summary file were copied onto the current one to resolve the issue (Prad).
  • 1607UT - Large difference between formatter and maser delays (Prad).
  • 1730UT - Experiment started OK (Prad).
  • 1800UT - Formatter to FS time difference 0.5 seconds or greater. Scan 310-1800 may have been affected (Prad).
  • 1914UT - Formatter to fs time difference 0.5 seconds or greater (Prad).
  • 2010UT - Formatter to fs time difference 0.5 seconds or greater. Scan 210-2010b may have been affected (Prad).
  • 2031UT - error qo -301 warning: Onsource status is slewing (Prad).
  • 2111UT - Formatter to fs time difference 0.5 seconds or greater. Scan 310-2111 might be affected (Prad).
  • 0207 - Source not reached due to windstow (JMc)
  • 0336 - Back on source (JMc) Scans between 0207 and 0336 will not be useful.
  • ~0330 Receiver cryogenic pressure high, vacuum pump started (JMc)
  • No Tsys readings, reason unclear (JMc)

Katherine 12m

Disk VSN: NRAO-180/2400 | Data volume at beginning: 0 GB

* 1730UT- Experiment started OK (Prad).

Yarragadee 12m

Disk VSN: HOB+0025/6000 | Data volume at beginning: 0 GB

  • 1730UT - Experiment started OK (Prad).
  • 03:55 - Network laggy, probably running on 3G backup. maser PC inaccessible (JMc)
/home/www/auscope/opswiki/data/attic/handover/ohg114.1541563104.txt.gz · Last modified: 2018/11/07 03:58 by Pradyumna Kiran Kummamuru