User Tools

Site Tools


handover:ohg120

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
handover:ohg120 [2019/08/13 16:37]
Tiege McCarthy
handover:ohg120 [2019/08/13 23:24]
Jamie McCallum
Line 3: Line 3:
 **Hobart 26m** **Hobart 26m**
  
-Disk VSN: HOB+1002 | Data volume at beginning: ​8432 GB+Disk VSN: HOB+1002 | Data volume at beginning: ​11382.198 ​GB
  
    * 1730UT Experiment started ok (Prad)    * 1730UT Experiment started ok (Prad)
 +   * First scan may have been affected because mk5 clocks required syncing (Prad).
 +   * 1737UT/​1745UT - mk5 crashed twice. Likely the first and second scans corrupted (Prad).
 +   * 1755UT - The module graphic magically turned from 28% free to 100% free as though the whole previous data was wiped off. Confirmed with '​DirList'​ on oper@mk5hb that this was not the case. Some strange ERC glitch? (Prad)
 +   * 23:21 - Swapped to HOB+0069 for remainder of OHG experiment. DirList on HOB+1002 shows valid data up to 11 TB but the record pointer was been reset to 0.2 TB. Module swapped to avoid overwriting some as yet unexported data from CRD104. (JMc)
  
 **Katherine 12m** **Katherine 12m**
  
-Disk VSN: GFSC+022/​8000 ​| Data volume at beginning: 0.00  GB+Disk VSN: HART-015 ​| Data volume at beginning: 0.00  GB
  
    * 1730UT Experiment started okay (Prad)    * 1730UT Experiment started okay (Prad)
Line 15: Line 19:
 **Yarragadee 12m** **Yarragadee 12m**
  
-Disk VSN: MAT+0003/​8000 ​| Data volume at beginning: 0.00 GB+Disk VSN: NYAL-013 ​| Data volume at beginning: 0.00 GB
  
    * 1730UT Experiment started okay (Prad).    * 1730UT Experiment started okay (Prad).
/home/www/auscope/opswiki/data/pages/handover/ohg120.txt · Last modified: 2019/08/14 11:51 by Tiege McCarthy