User Tools

Site Tools


handover:r1699

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
handover:r1699 [2015/08/04 22:35]
David Horsley
handover:r1699 [2015/08/05 14:27] (current)
David Horsley
Line 1: Line 1:
 ====== R1699 ====== ====== R1699 ======
 +
 +**Note to observers:​** Aircon in Auscope control room appears to be out of water or something. If you turn it on, it smells bad and doesn'​t really heat up the room.
  
 **Hobart 26m** **Hobart 26m**
Line 8: Line 10:
  
   * Exp started OK.   * Exp started OK.
 +  * He supply press ~275 psi. Informing Brett.
 +  * 5:15UTC - He was supplied, bringing pressure from 265 to 300 psi (Liza).
 +  * Signs of RFI in channels S5, S6 (overflow) pretty much all the time (Liza)
 +  * Racbus lost connection with newsmerd 2 times, the pcal control had to be returned to fs manually (calu...) Caused overflow of all VCs (Liza)
 +  * 11:45 He supply pressure ~278 psi.  Dropping at this rate it should be below 275 psi in about an hour or two. Liza will contact Brett and he will make decision (Anita)
 +  * A little after 14:00 UT Brett re-filled the He-supply, now is about 298 psi. (Ellen)
  
 **Katherine** **Katherine**
Line 15: Line 23:
 Start Pos: 0 GB Start Pos: 0 GB
  
-  * Exp started OK.+  * Exp started OK 
 +  * High Tsys in channels S1-S4 pretty much all the time (120-170K) (Liza)
  
  
Line 25: Line 34:
  
   * Exp started OK.   * Exp started OK.
-  * +  * Monica restarted twice due to ifpic problem (Liza) 
 +  * Monica also restarted twice due to ifpic problem - does not seem to be fixing it (Anita) 
 {{tag>}} {{tag>}}
  
  
 ~~DISCUSSION~~ ~~DISCUSSION~~
/home/www/auscope/opswiki/data/attic/handover/r1699.1438727754.txt.gz · Last modified: 2015/08/04 22:35 by David Horsley